IMD
Kawasaki ZX-9R ZX9R ZX900 Ninja 900 13008-1158 Piston Ring Sets x4 STD 73.00mm
Kawasaki ZX-9R ZX9R ZX900 Ninja 900 13008-1158 Piston Ring Sets x4 STD 73.00mm
SKU:
Couldn't load pickup availability
Delivery & Returns
Delivery & Returns
Orders placed before 11am GMT are shipped the same day. Other orders are dispatched within 1 working day (excluding weekends).
We ship worldwide, typically with DPD, UPS & Royal Mail.
30-day returns on unused items in their original condition and packaging.
Which size do I need?
Which size do I need?
STD (standard) is for an engine that has not been rebored - the original bore size.
Oversizes (+0.25mm, +0.50mm, +1.00mm ...) are for cylinders that have been rebored to that size. Choose the size your engine has been bored to.
Please measure your bore, or check with your engineer, before ordering. Not sure? Contact us with your measurement and we will help.
Read our piston size guide - how to measure your bore and choose STD or oversize.
A full engine set of four piston ring sets for the ZX-9R. Standard size, so no rebore is needed if your pistons and bores are still on size. If the pistons are good but the engine is smoking or down on compression, fresh rings are the cheaper route back to health.
What's included
- 4 x Piston Ring Sets — 73.00mm STD
- One set per cylinder — enough for the full four
- Pistons, pins and circlips are NOT included — rings only
Specification
- Part Number (O.E.M. reference): 13008-1158
- Size: STD / 73.00mm (standard — no rebore required)
- Piston Diameter: 73 mm
- Engine Type: 4-stroke
- Quantity: 4 ring sets (full engine set)
- Brand: IMD
- Condition: New
Fitment
- Kawasaki ZX-9R B1-B4 1994 - 1997
- Kawasaki ZX900 1994 - 1997
The ZX-9R was built in several engine sizes over its life, and they do not all share the same bore. This set is for the 73.00mm bore engine — measure your pistons or check your engine number before ordering.
Size check
This is a STANDARD size ring set for a 73.00mm bore. It will not fit an engine that has already been bored oversize. Where possible, all parts are listed by part number (O.E.M.). Buyer is responsible for confirming the correct size and fitment for their engine.
Fitting should be carried out by a competent engineer. No liability can be accepted for parts incorrectly fitted, or for any failure of such parts after fitting.
Share
